I just finished installing a 64K memory module from Hansenhobbies.com
for my Futaba 9CAP and couldn't be happier.
My transmitter has an 8 model memory and I had a 16K Campac memory module installed that increased my memory by another 6 models for a total of 14. The new Hansen module provides another 24 models for a total of 32.
It took me awhile of searching the different forums before I found out how to transfer the data from one mem mod to another, so I will post the procedure here in case anyone else wants to do the same.
After initializing the new memory module I began the transfer of data from the smaller 16K Campac to the larger 64K Hansen Campac.
First, I freed up a slot in my transmitter memory by copying it to my new campac, then I proceeded to copy fom the old campac to the freed memory slot in my transmitter.
Then I copyed from that slot to my new campac.
I did this for every model I wished to transfer. It required switching between campacs but only took about 10 minutes, so no problem.
Hansen Hobbies also has a 256K module that will increase model storage to about 100 models[:0]
Futaba
Moderator: hbartel
-
- Posts: 3330
- Joined: Thu Jun 20, 2002 10:30 pm
- Location: USA
- Dane McGee
- Posts: 885
- Joined: Fri Feb 21, 2003 1:57 pm
- Location: Greenville, Texas