I have the 35-30-1100 motor and a 6s battery which is two 3s on a y Harness.I am using this set up because I also wanted to do a twin for scale.My problem is even with my EPA all the way retarded I am still turning 18,000+ RPM is there a way to further reduce the RPM or am I going to have to get some 2S batteries to make it 5s.
Thank You Don
RPM to high
Moderator: hbartel
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact:
Re: RPM to high
Did you reset the EPA to 100% before plugging in the batteries to the ESC? Some ESCs do not have a memory and they have to be reset everytime.
Ed Kettler
RCCA 533/AMA 3739
Ft Worth, TX
Former target tug for the best RC Combat Pilots in the World!
RCCA 533/AMA 3739
Ft Worth, TX
Former target tug for the best RC Combat Pilots in the World!
-
- Posts: 244
- Joined: Sun Jan 08, 2006 11:20 am
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact:
Re: RPM to high
What radio are you using? Speed controller?
Ed Kettler
RCCA 533/AMA 3739
Ft Worth, TX
Former target tug for the best RC Combat Pilots in the World!
RCCA 533/AMA 3739
Ft Worth, TX
Former target tug for the best RC Combat Pilots in the World!
-
- Posts: 3330
- Joined: Thu Jun 20, 2002 10:30 pm
- Location: USA
Re: RPM to high
Use your sub trim. Set your subtrim at about -50% and that should let you slow it down to 17,500.
TEXAS ROCKS COMBAT HARD!!!
Lee Liddle
RCCA #628
[img]http://idata.over-blog.com/0/35/56/40/texas_flag.gif[/img]
Lee Liddle
RCCA #628
[img]http://idata.over-blog.com/0/35/56/40/texas_flag.gif[/img]
-
- Posts: 244
- Joined: Sun Jan 08, 2006 11:20 am
Re: RPM to high
I finally got a chance yesterday to try the subtrims and I was able to get it to 17.400RPM.
Thank you for your help Lee and Ed.
Thank you for your help Lee and Ed.
Don Fourson 386
-
- Posts: 3330
- Joined: Thu Jun 20, 2002 10:30 pm
- Location: USA
Re: RPM to high
No problem Don, glad to help.
TEXAS ROCKS COMBAT HARD!!!
Lee Liddle
RCCA #628
[img]http://idata.over-blog.com/0/35/56/40/texas_flag.gif[/img]
Lee Liddle
RCCA #628
[img]http://idata.over-blog.com/0/35/56/40/texas_flag.gif[/img]