Hi
I am getting ready to build the GreatPlanes Mustang
ARF for 2610 and noticed on page 12 of the plans
that the engine appears to be mounted at a slant
rather than (inverted) vertical.
Any experienced feedback would be appreciated.
Regards
Gary Oehrle
GreatPlane Mustang
Moderator: hbartel
- Which_way_is_up
- Posts: 1637
- Joined: Tue Feb 12, 2002 8:54 am
- Location: Dallas, Texas
My first comment would be don't build it for combat!!! If your unlucky you'll fly it in one round and then it'll be a bag of sticks. If your lucky you might get one event worth of flying out of it before it becomes a bag of sticks.
As far as getting some good info on building, etc go to R/C Universe and this thread and you'll get with a group that are building and flying them. http://www.rcuniverse.com/forum/m_2614119/tm.htm
As far as getting some good info on building, etc go to R/C Universe and this thread and you'll get with a group that are building and flying them. http://www.rcuniverse.com/forum/m_2614119/tm.htm
Gary
That Is one nice looking plane, but I agree with Roy
I have a bunch of lazer cut parts for the corostang good for 2610, firewall, formers, wing saddles, these parts are ready to glue on, ( I even have a cupple lazer cut parts (all the formers, wingsaddles, servotray, firewall etc.) left for the Dave West mig.
Email me your addres and ill ship a set of parts
Gil
That Is one nice looking plane, but I agree with Roy
I have a bunch of lazer cut parts for the corostang good for 2610, firewall, formers, wing saddles, these parts are ready to glue on, ( I even have a cupple lazer cut parts (all the formers, wingsaddles, servotray, firewall etc.) left for the Dave West mig.
Email me your addres and ill ship a set of parts
Gil