Scale Piranha's ?????????
Moderator: hbartel
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
Ben,
Sorry, I don't have time to do a complete rundown on this one. I wish I did have the time! [;)] But, here's the best I can do for ya:
Best bet is to print this drawing, take it to Staples or some other other copy place and have it blown up to the size you need.
HTH,
D
Darin Bellis
Ledyard, CT
RCCA 426
So many cool planes, so little time...
Sorry, I don't have time to do a complete rundown on this one. I wish I did have the time! [;)] But, here's the best I can do for ya:
Best bet is to print this drawing, take it to Staples or some other other copy place and have it blown up to the size you need.
HTH,
D
Darin Bellis
Ledyard, CT
RCCA 426
So many cool planes, so little time...
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
Darin,
What you've done is a huge help! I really like the plane and will see what I can do.. I'm a little worried about the 4.4" wing tips. I'm not sure I can get the cord that slim at the tip.[:(] I'll see what I can come up with but I don't know. "BUT THANKS" for what you've done, it had to take quite a bit of time!!! Not to mention the knowledge to do it!![;)][^]
OH Yea, I don't know how much more "Complete" a person could ask for!!!! COOL!
Thanks Darin!
Ben
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
What you've done is a huge help! I really like the plane and will see what I can do.. I'm a little worried about the 4.4" wing tips. I'm not sure I can get the cord that slim at the tip.[:(] I'll see what I can come up with but I don't know. "BUT THANKS" for what you've done, it had to take quite a bit of time!!! Not to mention the knowledge to do it!![;)][^]
OH Yea, I don't know how much more "Complete" a person could ask for!!!! COOL!
Thanks Darin!
Ben
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
Ben,
I was looking at the Devestator Thojo posted and it measures out to a 12.5" root chord and a 6" tip chord when sized to a 55" WS (1/12th + 10%). The fuse would be 35" long, and 5" in diameter. If I were CD I don't think I'd notice any lack of LE taper. That baby would give some very low wing loading.
NUNC AUT NUNQUAM
Mark V.
The perpetual 'newbie'
I was looking at the Devestator Thojo posted and it measures out to a 12.5" root chord and a 6" tip chord when sized to a 55" WS (1/12th + 10%). The fuse would be 35" long, and 5" in diameter. If I were CD I don't think I'd notice any lack of LE taper. That baby would give some very low wing loading.
NUNC AUT NUNQUAM
Mark V.
The perpetual 'newbie'
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
Tell me more Slam... I need about 6 fuses for a small fleet to compete with in Oct. I'll wack the wing in half if that's what it takes! Win lose or draw, don't really care. Just wanted to fly with the guy's... And to be honest about to throw the towel in and just help Micheal out, then get Sh** faced with some good ole boy's from Texas! Mark, Bob, Lee and ole Iron Head Cajun if I could get him over here! (You guy's have a place to stay if you want!) But let me know so the cooler is WELL stocked up.... Bob you got that elbow oiled yet??......... The table is waitin!
Thanks Slam!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
Thanks Slam!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
Ben
Glad to here you are going to fly in this one, it wouldn't be any good you on the sidelines.
As far as a plane, don't spend a lot of time on it, because I'm bringin those mean old Skyraiders, and they are hungry.
Is it october yet............Is it october yet..........Is it october yet.
I've been oiling the elbow quite a bit.
Glad to here you are going to fly in this one, it wouldn't be any good you on the sidelines.
As far as a plane, don't spend a lot of time on it, because I'm bringin those mean old Skyraiders, and they are hungry.
Is it october yet............Is it october yet..........Is it october yet.
I've been oiling the elbow quite a bit.
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
Bob,
You better oil that elbow pretty good! Ole Ben been warming up just to beat you and break the tie we;ve had going for a while on the table. Be ready to drink PLENTY ! And this time "No Smoking" for you as I would hate to look off the deck While Mark, Debbie and myself are having coffee again and see you all bent over (Not feeling to well! [:D] Thanks sooo much for the offer! If you have enough planes I'll fly those suckers! I do plan to have a Fulmer that Ron gave me a couple years back, so I'll fly as long as the planes last.
Thanks Buddy! Come on Oct.!!!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
You better oil that elbow pretty good! Ole Ben been warming up just to beat you and break the tie we;ve had going for a while on the table. Be ready to drink PLENTY ! And this time "No Smoking" for you as I would hate to look off the deck While Mark, Debbie and myself are having coffee again and see you all bent over (Not feeling to well! [:D] Thanks sooo much for the offer! If you have enough planes I'll fly those suckers! I do plan to have a Fulmer that Ron gave me a couple years back, so I'll fly as long as the planes last.
Thanks Buddy! Come on Oct.!!!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact:
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
Ed, The way it looks right now I'll have a Fulmar and a Boeing. On the Boeing I'll have to get it down to 3.5 and could be a problem?? Maybe not though...( I Hope 3.5 is correct) Fly as long as I can, then enjoy the company! That's the best part whit this bunch coming! [:D][xx(]
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
UPDATE! Thanks to the help of you guys and "Slam" ! The plane of choice will be the Devistator that Thojo posted a while back. Still have some R&D to go , but I have time to get it done. Postman dropped of a nice little package from Slam today, with cores and set of full size plans to go by! This is a HUGE help for a Non Scale guy! Thanks for all the help guy's!! And it looks like a scale "Fish" will be at the contest. maybe more than one??. Slam, I just wanted to thank you on the forum for your help, work and plans!! Thanks buddy, and I hope to make it up to you in some way!!!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
now that ben has some cores and is building, a quick question.
are the scale planes out there running 0 incidence, positive or negative?
he runs alittle positive on his pirannas and this is the same airfoil. i read somewhere that a bottom wing uses negative when top wings use positive.
thanks....and thanks ben for doing the r&d on this.
slam
are the scale planes out there running 0 incidence, positive or negative?
he runs alittle positive on his pirannas and this is the same airfoil. i read somewhere that a bottom wing uses negative when top wings use positive.
thanks....and thanks ben for doing the r&d on this.
slam
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact:
-
- Posts: 1396
- Joined: Wed Oct 03, 2001 6:34 pm
Thanks ED,
That's what I'll shoot for. [:D] Na , the meter don't lie, I'll get it.
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!
That's what I'll shoot for. [:D] Na , the meter don't lie, I'll get it.
Ben Morrow AKA "Hillbilly"
www.downhomerc.com
"Furballs" are for me!