Hi-Tech

Here's the place to chat about radios, transmitter, receivers, batteries, and everything related to your radio gear.

Moderator: hbartel

Post Reply
combatgoblin
Posts: 244
Joined: Sun Jan 08, 2006 11:20 am

Hi-Tech

Post by combatgoblin »

I have a Hi-Tech Prism computer radio.
when your on either aileron on hi/low rate and set the ailerons level there fine but when you change the rates to hi/low they change
rates like there suppose to but they add in a hard right turn.This
dosn't happen with the elevater hi/low switch. Any idea's?
Lee Liddle
Posts: 3330
Joined: Thu Jun 20, 2002 10:30 pm
Location: USA

Post by Lee Liddle »

I think that you might have different trim settings or maybe sub-trim settings for high and low rates. Scroll through your menu and look for sub trim. When you find it and it`s on aileron, flip your rate switch and see if the number changes.
combatgoblin
Posts: 244
Joined: Sun Jan 08, 2006 11:20 am

Post by combatgoblin »

Thank's Lee for the info. I tried doing what you said but to no avail.On one of the trims it just buzzed and the LED just flickered
and I could not change it.I'm going to either retire or have this radio repaired thank's again for the help.
Post Reply