I am trying to set up an electric ssc ship but I can not get it to work.I am using a 2650 4cell battery and a 60 amp speedcontroller.
so this is what happens when I plug in the power the SP beeps but I get no power to anything,if I plug a reciever battey into the battery slot in the reciever I get power to the ailerons and elevator so if anybody has any suggestions let me know thanks.
Speedcontroller?
Moderator: hbartel
Re: Speedcontroller?
Don,
Have you tried cycling your transmitter throttle from low to high after ensuring it really was reaching low and you do not have sub-trim and ATV preventing that?
My concern now is, that if you have a BEC circuit on the Speed controller, plugging a battery into the receiver AT THE SAME TIME may well fry the controller.
Don't ask me how I know that!!
Have you tried cycling your transmitter throttle from low to high after ensuring it really was reaching low and you do not have sub-trim and ATV preventing that?
My concern now is, that if you have a BEC circuit on the Speed controller, plugging a battery into the receiver AT THE SAME TIME may well fry the controller.
Don't ask me how I know that!!
Keith Jones
AMA CD #7601
Radio Control Club of Detroit
and proud member of the OGC
AMA CD #7601
Radio Control Club of Detroit
and proud member of the OGC