Real armor for scale planes

Here you'll find helpful hints on making your planes stronger.

Moderator: hbartel

Post Reply
User avatar
boiler
Posts: 3336
Joined: Wed Jan 01, 2003 8:16 pm
Location: Ohio
Contact:

Real armor for scale planes

Post by boiler »

At last years NATS I built my P-40 planes using a simple yet amazing design for the fusalage. I used a two foot long piece of fence post (electric from TSC) glued in the center (side to side) starting at the front and just reaching the tail feathers. I placed it low enough to put the fuel tank on top of the post and have an acess cover over the tank. I screwed a piece of cutting board in front of the tank and into the motor mount also made of HDPE. I didn't mean to test it at the NATS but did. Full throtle straight down and burried up to the leading edge. When I got home I had to remove dirt from the engine cowel area and screw my cowl back on. No more crushed firewalls. if a plane broadsides me, I should only lose some foam and the plane will be functional. I may build a 2610 Zero to take out west if I can find the time.
Bob (Longhaul) Loescher
rcca# 621 RC Combat Geezer
Bring those planes in closer where I can see them.
[url=http://www.rccombat.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=11380][img]http://www.rccombat.net/gallery/main.php?g2_view=core.DownloadItem&g2_itemId=11381[/img][/url]
Post Reply