Matrix Software
Moderator: hbartel
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact:
I will have the very first Beta copy ready to go here shortly! It's compiled, just need a quick test to see how see does, then I'll put in the gallery.
I made this version expired at the end of the month sense it's just a beta release.
I've enclosed part of the readme. Take a look at it because that's the only documentation for the program that there is at this point!
Chunk.
I made this version expired at the end of the month sense it's just a beta release.
I've enclosed part of the readme. Take a look at it because that's the only documentation for the program that there is at this point!
Chunk.
Code: Select all
---------------------------------------
Wish List
---------------------------------------
(?) Allow CD to manually edit the matrix
(?) Scoring
---------------------------------------
To Do
---------------------------------------
(+) Build heat cards
(+) Build round cards
(+) Printing
(+) Check for Dupe names when adding pilots
(+) Check for No-Fly Frequencies when loading pilots
(+) Add the Zone into the calculatiions
(+) Add the zone information to the ini file.
---------------------------------------
Completed and Tested:
---------------------------------------
(-) Load V1 & V2 Pilots
a) All V1 File ZONES defaults to NONE, no zone
(-) Save V2 Pilots ONLY
(-) Calculate the Minimun No of Heats based on the Maximun
No. of Frequency Contflicts. i.e. 52, 52, 52 = Minimum of 3 Heats
(-) Add Pilots to the Pilots List - Single Click name in Pilots List
(-) Remove Pilots from the Pilst List - Double Click name in Pilots List
(-) Add new Zone to the combo selection box.
(-) User FeedBack : # of Pilots, Total # Heats, Error Messages and other
Messages to Status Bar,
(-) Default Save File Name as "Contest-Class.MV2"
(-) Channels :Recode: C11-C60, Hxx-Hxx, Syy-Syy ...
(-) Use ini file for Config / Setup
(-) Config File w/ "new" Channel numbering system
(-) No-Fly chanels added
(-) Ability to add new frequencies to the list
(-) Very basic Microsoft Excel Export routine
(-) Display the Matrix on the main screen in an orderly mannor using an
MSFlexiGrid
(-) FlexiGrid Columns will auto resize when generation new matrix.
(-) Clear FlexiGrid if matrix parameters are changed. (Rounds, Heats,...)
(-) Automatical add/remove "tabs" to/from the the FlexiGrid when the
No. of rounds changes.
(-) Automatical add/remove Cols/Rows to/from the FlexiGrid when Heats or
No of Pilots per Round changes.
(-) Colored the Odd numbered rows in the FlexiGrid for ease of reading.
I've uploaded the new file as an Installation Package. Let me know if you have any problems.
http://spadfest.rcspads.com/albums/Matr ... _Beta1.zip
cc
http://spadfest.rcspads.com/albums/Matr ... _Beta1.zip
cc
-
- Posts: 941
- Joined: Mon Jun 06, 2005 2:00 pm
- Location: USA
- Contact:
Alex,
I was just getting ready to post a bug report on this. I just found it too.
There will be more so just post them here and I'll get them taken care of. If there's a work around I'll post it.
<b><font color="red"><u>BUG #1</u></font id="red"></b> - When you click "Add New" It will attempt to clear the Pilots list after it adds the new pilot.
<b><font color="green">Work Around</font id="green"></b> - Click "No" and the Pilot will be added.
cc
I was just getting ready to post a bug report on this. I just found it too.
There will be more so just post them here and I'll get them taken care of. If there's a work around I'll post it.
<b><font color="red"><u>BUG #1</u></font id="red"></b> - When you click "Add New" It will attempt to clear the Pilots list after it adds the new pilot.
<b><font color="green">Work Around</font id="green"></b> - Click "No" and the Pilot will be added.
cc
<b><font color="red"><u>Bug #2</u></font id="red"></b> - Program will hange (Stop Responding). It's hanging on trying to add freq conflicts to the matrix. It was found using LSN's Open B file with Rounds >= 5, Heats = 3.
It will hang on round 5, Heat 3, second position.
<font color="green"><b>Work Around</b></font id="green"> - NONE. Don't add that combination to the matrix configuration.
You can stop the program on Window 2000 / Xp by right clicking the taskbar and select "Task Manager". Find Matrix V2.exe in the list and click the "End Now" button. This might work on NT also, but I don't have an NT box here right now to test it on.
[[
It will hang on round 5, Heat 3, second position.
<font color="green"><b>Work Around</b></font id="green"> - NONE. Don't add that combination to the matrix configuration.
You can stop the program on Window 2000 / Xp by right clicking the taskbar and select "Task Manager". Find Matrix V2.exe in the list and click the "End Now" button. This might work on NT also, but I don't have an NT box here right now to test it on.
[[
I fixed these two bugs today and replaced the installation package with the updated executable files.
http://spadfest.rcspads.com/albums/Matr ... _Beta1.zip
I added the Matrix V1 files from the '06 LSN meet to the package.
I also added a version.txt and updated the readme.
I had to change the interface because I inadvertantly got it larger than 800x600.
[[
http://spadfest.rcspads.com/albums/Matr ... _Beta1.zip
I added the Matrix V1 files from the '06 LSN meet to the package.
I also added a version.txt and updated the readme.
I had to change the interface because I inadvertantly got it larger than 800x600.
[[
Chunk,
I tried it out for everyone pre-registered to the Bushwacked 06 in West palm Beach, and I have 2 frequency conflicts. 2 people are on 15 and 2 are on 23. It forces me to have 3 heats. it should only be forcing 2 heats. Maybe I am doing something wrong. I can email you the pilot/ freq file.
Thanks, it certainly is starting to look sweeeeeeet.
I tried it out for everyone pre-registered to the Bushwacked 06 in West palm Beach, and I have 2 frequency conflicts. 2 people are on 15 and 2 are on 23. It forces me to have 3 heats. it should only be forcing 2 heats. Maybe I am doing something wrong. I can email you the pilot/ freq file.
Thanks, it certainly is starting to look sweeeeeeet.