Warbird Materials1

You got a cool electric WWII combat rig? This is the place to show it off!

Moderator: hbartel

Alex Treneff
Posts: 941
Joined: Mon Jun 06, 2005 2:00 pm
Location: USA
Contact:

Post by Alex Treneff »

Ok, thanks. That will answer what I need to buy when I go back to the hobby store. What size wire are you guys using? Are there any certian horns and clevis's that work well? Oh, and is it the HS-55 or the HS-56?
Lou Melancon
Posts: 2389
Joined: Wed Apr 04, 2001 5:16 pm
Contact:

Post by Lou Melancon »

Alex,
I use the 55s. Also use the $9 servos you can get at www.raidentech.com which are similar to GWS Pico Naros. Use the micro sized DuBro horns and fairly light wire. If you want to get fancy use small diameter carbon shafts and add wire to each end. Overkill but cool.
drewjet
Posts: 1101
Joined: Fri Mar 16, 2001 5:24 am
Location: USA
Contact:

Post by drewjet »

I use the HS-56, they are a few bucks more but seem to be a lot stronger. They have the Carbonite gears which seem to be near the strength of the metal gears but with the lightness of plastic.

Drew
Alex Treneff
Posts: 941
Joined: Mon Jun 06, 2005 2:00 pm
Location: USA
Contact:

Post by Alex Treneff »

I noticed in the spreadheet on georgiacombat.com, that at Dixie Richard Taylor flew a Lavochin LA-5 with a Thunder Power 2 Cell 730 mah battery. Did he get a full flight on this size battery?
thojo
Posts: 1926
Joined: Thu Feb 21, 2002 1:20 pm
Location: USA
Contact:

Post by thojo »

All of Richards planes are built extremely light, and used small motors, so he had no problems with flight time...
Post Reply

Return to “Electric WWII Fighters”