<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Ed Kettler</i>
<br />HI Chunky,
Just to let you know we really appreciate all of this work that you have been doing. This is really super.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Glad I could help. I only wish we could get more feedback from more people. Keep silent and you get what you get, that's what I say.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Ed Kettler</i>
I ran a test this evening using a modified version of the LSN Open B file with two sets of 3 pilot frequency conflicts, and it looks like it did a very good job of balancing the pilots. In a seven round contest, they flew against each other at least twice, with only a couple of pairings in consecutive rounds. This is very good!
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Try it with no conflicts. [xx(] It's still not the best, but it's better than it was. This still needs some TLC I'm afraid.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Ed Kettler</i>
On the Excel file, you can stack the rounds on the same page. I can't see a need to have one page per round. The CD would use that format to control the contest. Having it look like the "Round Card" above is perfect.
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Well right now I'm going to leave it as is. Doing one round / page like this is the easiest way to program it. If later on, this becomes an issue, I'll change it then. OK?
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Ed Kettler</i>
The Heat Sheet tab looks like it is on the right track with the headers, need to see it with some data on the Round/heat info as I'm not quite sure where you are headed.
This is very cool! Thanks again!
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
I have all of the basic needs meet. I am ready to release V2.0. I'm going to continue testing here putting it through it's paces to see if I can come up with any more issues. I should release one more Betta but there's only like 2 - 3 people testing it that I can tell. That's not nearly a large enough sample group to determine if there are any platform specific issues that I missed. Time will find those as more people use it I guess.
There could be some issues using Excel, but hopefully my research has found all of the issues with that.[B)]
ED:
I update the spreadsheet. D/L it again as it's the final version. It's the same filename as the last one.
http://spadfest.rcspads.com/albums/user ... Open_B.zip
Maybe that will clear up some things?