Webra Advice Needed

Tell us what you do to get the best performance from your engines.

Moderator: hbartel

Lou Melancon
Posts: 2389
Joined: Wed Apr 04, 2001 5:16 pm
Contact:

Post by Lou Melancon »

Dane,
When I was running Norvels hard I had to use OS R5 plugs. They are cold and made for car racing. They held up very well.
mad
Posts: 532
Joined: Mon Mar 11, 2002 12:28 pm
Location: USA

Post by mad »

When we were using them with the pressure system We used tthe Mccoy 9 and uery seldom had a problem.
sgilkey
Posts: 2351
Joined: Mon Mar 19, 2001 8:26 am

Post by sgilkey »

I have not used the Mccoy 9 on a webra but we used to use them in racing on engines that had a tendency to blow plugs and they almost always solved the problem. i have used OS 8 plugs in Brian's webras and they have held up well. the HS needle is very sensitive. you need to have a prop that will let the engine wind up on the ground, the engine needles best if it is well over 19k on the ground and preferably 20k. i had fewer needling problems when i switched to Powermaster fuel.
User avatar
Dane McGee
Posts: 885
Joined: Fri Feb 21, 2003 1:57 pm
Location: Greenville, Texas

Post by Dane McGee »

Thanks guys for all the help.
Last edited by Dane McGee on Mon Mar 01, 2010 5:12 pm, edited 1 time in total.
Post Reply