3696 roll call-what's been built so far?
Moderator: hbartel
-
- Posts: 1150
- Joined: Thu Mar 15, 2001 11:37 pm
3696 roll call-what's been built so far?
I'm just curious as to what has been built so far, so I thought I'd start a list of flyable aircraft, and works in progress...
Here's my list:
Macchi 202-Scrounged from old Warbirds LTD glass fuse and Lee Liddle wing cores
Yak-3-Built partially from Gus morfis plans and my twisted imagination
Brewster Buffalo-my design from a 3-view by Ed Kettler, cores cut by Scott Stockwell
Bearcat-awaiting FCF (test flight)-conversion of old Warzone Models kit
More to come..[:D]
Cash
Here's my list:
Macchi 202-Scrounged from old Warbirds LTD glass fuse and Lee Liddle wing cores
Yak-3-Built partially from Gus morfis plans and my twisted imagination
Brewster Buffalo-my design from a 3-view by Ed Kettler, cores cut by Scott Stockwell
Bearcat-awaiting FCF (test flight)-conversion of old Warzone Models kit
More to come..[:D]
Cash
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact:
-
- Posts: 3330
- Joined: Thu Jun 20, 2002 10:30 pm
- Location: USA
Locked and Loaded:
One P-40D slightly oversize wing area (test plane)
One P-40C totally spec and flies awesome, even at altitude
Still in the hangar
One P-40C almost ready
My brother Vic (who never sems to post here) has a jj P-51 built and sort-of test flown.
Several P-51 / Pxx kits in the hands of CO builders who should be posting pics any day now!!! and a couple more setups on the way.
All jj kits (hunks of foam)
One P-40D slightly oversize wing area (test plane)
One P-40C totally spec and flies awesome, even at altitude
Still in the hangar
One P-40C almost ready
My brother Vic (who never sems to post here) has a jj P-51 built and sort-of test flown.
Several P-51 / Pxx kits in the hands of CO builders who should be posting pics any day now!!! and a couple more setups on the way.
All jj kits (hunks of foam)
-
- Posts: 83
- Joined: Wed Dec 21, 2005 2:46 pm
- Location: USA
I have 7 in the hanger, 3 flying so far.
P-47 Silver Bubble Top (flying)
P-47 Blue Camo Bubble Top (in process)
P-47 Olive Razorback (in process)
Zero (flying but wing is being redesigned)
Bf-109 Afrika Corps (in process)
Hellcat (in process..Walker, my 12 year old is building this one)
Polkarpov I-153 (flying)
P-47 Silver Bubble Top (flying)
P-47 Blue Camo Bubble Top (in process)
P-47 Olive Razorback (in process)
Zero (flying but wing is being redesigned)
Bf-109 Afrika Corps (in process)
Hellcat (in process..Walker, my 12 year old is building this one)
Polkarpov I-153 (flying)
-
- Posts: 3330
- Joined: Thu Jun 20, 2002 10:30 pm
- Location: USA
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Polkarpov I-153 (flying)
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Mike, haven`t hear updated lately, you`ve got to post some pics of the Polkarpov, Cash is having a fit.[:D]
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Mike, haven`t hear updated lately, you`ve got to post some pics of the Polkarpov, Cash is having a fit.[:D]
-
- Posts: 3330
- Joined: Thu Jun 20, 2002 10:30 pm
- Location: USA
On my P40 the front scoop is functional for cooling the ESC. If Hattrick has something similar with his setup, he may be a little nervous about landing on all that fine white "sand" laying on the ground by him. At out Polar Fly (Jan 1st) i made one landing a bit nose down and had to rush to blow out the snow before it melted all over the ESC.[:0]
-
- Posts: 116
- Joined: Sun Jul 03, 2005 10:35 pm
- Location: USA
Have 1 Sea Fury currently being built and a Hawker Typhoon on the drawing boards (should start this towards the end of February).
In the end, my planes won't count for much seeing I'm so far away from the action, but I will make the cad files available if someone would like them. I'll have to combat vicariously through others.
Nate
In the end, my planes won't count for much seeing I'm so far away from the action, but I will make the cad files available if someone would like them. I'll have to combat vicariously through others.
Nate
-
- Posts: 83
- Joined: Wed Dec 21, 2005 2:46 pm
- Location: USA
- Ed Kettler
- Posts: 3437
- Joined: Sat Dec 15, 2001 6:05 pm
- Location: USA
- Contact: