DX6i reciever's
Moderator: hbartel
-
- Posts: 183
- Joined: Tue Mar 04, 2008 9:14 am
- Location: USA
- Contact:
DX6i reciever's
I won a new DX6i at our club Christmas party last December. Have yet to try it out. It came with one ar6200. Any dos or don't s anyone had with this system? Any suggestions on where to get good receivers that are compatible with this radio at a reasonable price? Thanks!!
David Turner
RCCA member #934
AMA Contest Director / Leader Member # 8822
Texoma RC Modeler's member
http://www.texomarc.org/
RCCA member #934
AMA Contest Director / Leader Member # 8822
Texoma RC Modeler's member
http://www.texomarc.org/
Re: DX6i reciever's
I've had a DX6i for about two years, and really like it. I've used it mostly for my electric and slope planes, and have flown glitch-free for the entire time (wish I could say that about my Optic 6). I've used the AR6100 "Park flyer" receivers, and have flown my electric Arrow so high that I couldn't tell up from down on the plane... and the 6100 is a single module receiver. The 6200 has a primary and remote receiver, so that should be even better.davidturner wrote:I won a new DX6i at our club Christmas party last December. Have yet to try it out. It came with one ar6200. Any dos or don't s anyone had with this system? Any suggestions on where to get good receivers that are compatible with this radio at a reasonable price? Thanks!!
I really like the model lock setup -- so you can't accidentally mis-control a plane if you have the wrong model selected from memory, it simply will not lock on.
Cons: Two things. The menu selection knob is a little twitchy, sometimes you mean to press it to make a selection, and instead it turns a little and moves the cursor in the menu. The second issue I've encountered only relates to an issue for elevon mixing, where one side moves more than the other - there's an easy fix to use the AUX port of the receiver instead of the elevator for mixing for elevon.
I think you're pretty much locked into Spektrum brand receivers, at least I don't know anyone who has used anything else. They tend to be a little pricey, at ~$50 for the AR6110 park model. But no crystal needed, so there's some savings there. With the experience I've had, I wouldn't hesitate to use the "park model" receiver for a combat plane, you're rarely going to fly that far away.
-= Dave
David Lorentzen
RCCA# 832
RCCA# 832
Re: DX6i reciever's
David, I'm not using a DX6i I have a Futaba with the Spectrum mod but I have been using the AR6100 park flier recievers no with no issues. There $50 each almost anywhere. I've been putting them in the wing of my Bandito's but they fit nicely in the box of the battleaxe also.
Paul Schoggin
-
- Posts: 183
- Joined: Tue Mar 04, 2008 9:14 am
- Location: USA
- Contact:
Re: DX6i reciever's
Thanks for the information guys! I appreciate it.
Paul try this web site for the receivers. A few $ less.
http://www.bigskyhobby.com/Radio-System ... ivers-c56/
or this one.....
http://www.snhobbies.com/index.php?cPat ... 9398584a3f
Paul try this web site for the receivers. A few $ less.
http://www.bigskyhobby.com/Radio-System ... ivers-c56/
or this one.....
http://www.snhobbies.com/index.php?cPat ... 9398584a3f
David Turner
RCCA member #934
AMA Contest Director / Leader Member # 8822
Texoma RC Modeler's member
http://www.texomarc.org/
RCCA member #934
AMA Contest Director / Leader Member # 8822
Texoma RC Modeler's member
http://www.texomarc.org/
Re: DX6i reciever's
Great find, David. Thanks for sharing.davidturner wrote:Thanks for the information guys! I appreciate it.
Paul try this web site for the receivers. A few $ less.
http://www.bigskyhobby.com/Radio-System ... ivers-c56/
or this one.....
http://www.snhobbies.com/index.php?cPat ... 9398584a3f
-= Dave
David Lorentzen
RCCA# 832
RCCA# 832